Updated: July 13, 2021

This is an assembled LED lighting kit for the Polar Lights 1/1000 Star Trek USS Reliant NCC-1864 kit.

No soldering or electronics knowledge required! It is plug and play. Small modifications to the model kit are necessary (outlined in included instructions).

Adds the ability to light the nacelles, engines, front dish, impulse engines and windows.

What is included:

• Pre-wired LED kit to illuminate the windows (20 white LEDs), top and bottom impulse wells ( 2x blue), impulse engines ( 2x red), and multiple lights for the nacelles (blue)

• Pre-wired AAA battery pack (batteries not included)

• There is also support for this kit if you have any questions, concerns, etc.

What you need:

• The kit requires 2 AAA batteries to supply power(which are easily available online and in most stores).

• 0.5 - 0.75 mm for windows, 3 mm and 4.8 mm (3/16") drill bits

• Pin Vise (small drill bit hand driver)

• Hobby knife

• Spruce cutters (wire cutters)

• Glue (white glue/hot glue)

• Optional(but helpful): rotary tool (like a Dremel)

Retails: $50.